Importance of Tyre Changer machine

Tyre changer is necessary to transmit the traction, braking force and lateral force of the vehicle, and also absorb and reduce the vibration and impact from the road surface to ensure the safety and comfort of the vehicle. Therefore, the quality of the tire cannot be slacked off for a minute. Therefore, the repair and replacement of tires have become a more frequent task in tire shops，tyre changer - as an indispensable tool for tire repair and replacement, it plays an important role in the entire process. However, it is expensive, and tire people need to be more careful in its use and maintenance.

The tyre changer is a necessary equipment for tire shops. When using the tyre changer, there are some tips to facilitate your use:

For tires with good tread but soft and thin tread

When using a pneumatic shovel, if the tire slips, you can slightly lift the pneumatic shovel control pedal, push the tire inward, confirm that the shovel mouth is in contact with the tire mouth, then support it with your legs or hands to prevent the tire from returning to its original position, and then step on the control pedal. It is easier to shovel the tire at this time.

For tires that have been used for a long time in sports cars

The tires are subjected to internal air pressure for a long time, and the heat generated by the friction between the tires and the ground makes the tires fit the steel rims. If the tire cannot be removed by using a pneumatic shovel, you can first dissolve detergent in water, use a small brush to brush more solution on the tire lip and the steel rim, wait for the solution to penetrate into the gap between the tire lip and the steel rim, and then use a pneumatic shovel to remove the tire.

For tires with harder tire mouths

It is best to use a car spring steel plate when removing the tire, and it is more convenient to pry the tire mouth with a homemade extended crowbar. When installing the tire, press the tire belly with both hands. When the difference is about 200mm and the tire mouth is the tightest, press the tire belly with your right elbow and push the tire clockwise with your left hand to prevent the motor and V-belt from slipping and protect the motor.

Tyre changer Maintenance

1. Keep the turntable clean. If used frequently, it should be cleaned with clean gasoline and lubricating oil every week.

2. Clean and lubricate the friction parts that are frequently moved.

3. Check the air filter and oil mist filter regularly, drain the condensed water in the filter sedimentation cup in time and add lubricating oil to the oil mist filter to protect the cylinder.

4. Check the tightness of the transmission belt in the box regularly and adjust it.

In the world of automotive maintenance, tyre changers are an essential tool that has revolutionized the way tires are maintained. This mechanical marvel not only increases the efficiency of tire changing, but also significantly improves the safety and precision of the process. The following article delves into various aspects of tyre changers, their importance, and their impact on the automotive industry.

One of the primary benefits of tyre changer machines is the increased efficiency they bring to tire service. In the past, removing a tire could take a technician several minutes or even hours, depending on the type of tire and wheel. With modern tyre changers, this process is reduced to mere minutes, allowing service centers to handle a higher volume of customers in a shorter amount of time. This efficiency is crucial for businesses operating in a competitive market where customer satisfaction and quick turnaround times are key to success.Safety is another critical aspect where tyre changers excel. Manual tire changing can be hazardous, as it involves the use of heavy tools and the risk of injury from sharp objects or improper handling.